Продукти за fh европа (7)

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

Machine Parkour

Our company EMART GROUP, whose foundation year is 2020, continues to be the most preferred one in Turkey and the world in the export sector since its establishment, and at the same time, we are a manufacturer company that produces camera junction boxes, CCTV Accessories with quality materials. Our company, which provides service in the world and in Turkey, has consumers in more than 48 provinces in Turkey. Our company, which dominates the foreign market as well as the domestic market, has dealerships in many countries. These are Russia (Kazan and Krasnoyarsk), Palestine, Israel, Uzbekistan, Egypt, Algeria, Kazakhstan, Kenya, Iraq.

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

AFR-EXA05 LD x CD x L x e:E50 x 23 x 8 x 1,5, E50 x 23 x 8 x 2 ACIER kg/m²:8,2, 10,95 ALUMINIUM kg/m²:2,85, 3,75 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:10 Vide frontal % Vide maxi:43 env.

PRPI003

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label